Transistors
Step 8
We now solder the two NPN transistors into position.
•
Bend the component leads away from the body of the transistor. Note that
•
each transistor has its base lead bent in a different direction. Therefore it is
best to bend and then solder each transistor one at a time.
The leads on the transistors may be bent directly at the body.
•
do this ONCE!
component lead from the body of the transistor.
Copyright © 2018 - 2019
Repeated bending of the leads will result in breaking the
www.yoofab.com
ASSEMBLY INSTRUCTIONS
RFLEGO Active Antenna Receiving Loop
G.D.COWNE - MØOOZ
Be careful to
page 29 of 66