Table of Contents
Advertisement
Printed Circuit Board
Step 1
Inspect the Printed Circuit Board. Make sure that the copper side looks like the
illustration below.
Note that the illustration shows a difference between the tracks (dark grey) and
•
the ground plane (light grey). In reality, there should be no difference in the
appearance of the copper tracks and that of the ground plane.
Copyright © 2018 - 2019
www.yoofab.com
ASSEMBLY INSTRUCTIONS
RFLEGO Active Antenna Receiving Loop
G.D.COWNE - MØOOZ
page 21 of 66
Advertisement
Table of Contents
