Package Contents; Hardware Overview; System Requirements - D-Link Nuclias Connect AC1200 Quick Installation Manual

Before You Begin
This installation guide provides instructions
for installing the DAP-3666 on your network.
Additional documentation is also available on
the D-Link support website.
• Nuclias Connect Manual: For additional
information and instructions on how
to configure the device using Nuclias
Connect.
• DAP-3666 User Manual: For additional
information and instructions on how to
configure the device using the web user
interface.

Package Contents

This DAP-3666 package includes the following
items:
• DAP-3666 Access Point
• Mounting Plate and Hardware
• Grounding Wire
• Quick Start Guide
• Mounting kit (Wall/Pole Mount)
- Stainless steel mount base x 1
- Stainless tie back straps x 2
- Wall screw x 4
- Wall plug x4
- Stainless mount screw (hexagonal hole) x1
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: To power the unit, use an 802.3af or
802.3at PoE Switch or PoE Injector.

System Requirements

• Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter
DAP-3666 Quick Installation Guide
• Internet Explorer 11, Safari 7, Firefox 28,
or Google Chrome 33 and above (for
configuration)

Hardware Overview

LED Indicators
LAN2
1
Figure 1: Front Panel LED
# LED
Green (Solid) - Device operational
Red (Flashing) - Device booting
Power/
1
up/Device malfunctioned
Status
Red (Solid) - Device boot up
has failed
Table 1: LED Description
Interface Connectors
LAN2
1 2 3
Figure 2: Bottom Connectors
# Connector
Mounting
Connector for the mount screw.
1
Lock
Press and hold for 10 seconds to
2 Reset
factory reset the device.
3 LAN2 Port Gigabit RJ-45 port for data.
LAN1(PoE)
Description
LAN1(PoE)
4
Description
1