Top Controls And Indicators - BOXLIGHT CP-15t User Manual

BEFORE OPERATION
LAMP INDICATOR
This indicator is lit in dimly lit
when the projector is turned
on. And the light is brightly lit
when the projector is in stand-
by mode.
MENU BUTTON
Used to active or terminate the
MENU operation.
(Refer to P19.)
AUTO IMAGE BUTTON
Used to operate AUTO IMAGE
function.
(Refer to P29.)
FOCUS BUTTON
Used to select focus adjust.
(Refer to P23.)
PAGE BUTTONS
Used to move to the next /
previous page of the data in
the memory card plugged into
PC CARD SLOT.
buttons are used to stop or
resume AUTO-PLAY function.
Page buttons are activated in
MCI mode only.
(Refer to P34.)
18

TOP CONTROLS AND INDICATORS

LAMP REPLACE INDICATOR
This indicator turns to yellow
when the life of the projection
lamp draws to an end.
(Refer to P43.)
LAMP REPLACE
MENU
AUTO IMAGE
PAGE
These
ZOOM BUTTON
Used to select zoom
adjustment.
(Refer to P23.)
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(Refer to P42.)
WARNING TEMP.
LAMP READY
SELECT
FOCUS
ZOOM MODE
MODE BUTTON
Used to select input source.
(Computer, Video and MCI)
(Refer to P25 and 31.)
READY INDICATOR
This indicator lights in green
when the projector is ready to
be turned on.
POWER ON–OFF BUTTON
Used to turn the projector on
or off. (Refer to P22.)
ON–OFF
POINT BUTTONS
Used to move the pointer.
(Refer to P19.)
SELECT BUTTON
NORMAL
Used to execute the item
selected or to adjust the values
in certain items on the MAIN
MENU DISPLAY.
+
NORMAL BUTTON
VOLUME
Used to reset to normal picture
–
adjustment preset by factory.
(Refer to P29 and 32.)
VOLUME BUTTONS
Used to adjust volume.
(Refer to P24.)