High voltages capable of causing severe
injury or death by electrical shock are
present in this unit.
•
To reduce risk of electrical shock, disconnect power
before working on or around the system. More than
one disconnect switch may be required to de-ener-
gize the equipment before servicing.
•
This pump is supplied with lead wires and is intended
to be hardwired using a junction box or other
approved enclosure. The pump includes a grounding
connector. To reduce risk of electric shock, be certain
that it is properly connected to ground.
•
Be certain that this pump is connected to a circuit
equipped with a ground fault circuit interrupter
(GFCI) device.
•
Wire pump system for correct voltages.
•
The pump should only be used with liquids compati-
ble with pump component materials. If the pump is
used with liquids incompatible with the pump com-
ponents, the liquid can cause failure to the electrical
insulation system resulting in electrical shock.
Risk of damage to pump or other equipment.
•
Periodically inspect pump and system components.
Regularly check hoses for weakness or wear, making
certain that all connections are secure.
•
When operating in a gas furnace environment, care
must be taken to ensure acidity of condensate does
not fall below the average pH of 3.4 (to prevent a
localized pocket of acid that acts like a battery caus-
ing pitting) by routinely cleaning or flushing tank
with fresh water.
•
Schedule and perform routine maintenance as
required and in accordance with the Maintenance sec-
tion of this manual.
Risk of bodily injury, electric shock,
or equipment damage.
•
This equipment must not be used by children or per-
sons with reduced physical, sensory or mental abili-
ties, or lacking in experience and expertise, unless
supervised or instructed. Children may not use the
equipment, nor may they play with the unit or in the
immediate vicinity.
•
Equipment can start automatically. Lockout-Tagout
before servicing equipment.
•
An inoperative or malfunctioning pump could lead to
flooding, resulting in personal injury or property
damage.
•
Operation of this equipment requires detailed instal-
lation and operation instructions provided in this
manual for use with this product.
•
Read entire manual before starting installation and
operation.
•
End User should receive and retain manual for future
use.
•
Keep safety labels clean and in good condition.
•
Keep work area clean, well-lit, and uncluttered.
•
Wear safety glasses while installing or performing
maintenance on the pump.
SAFETY INSTRUCTIONS
Before Getting Started
3