Turning The Printer Off - Canon Satera LBP3900 User Manual

If no abnormality is found during the self-diagnostic test, the
刷可
come on, <
display, and the printer is ready to print.
Paper Source Indicators
The following information is displayed in the display.
Printable and not
processing print data

Turning the Printer OFF

Turn the printer OFF using the following procedure.
IMPORTANT
If the printer is used on a network, make sure that it is not printing data from another
•
computer before turning the power OFF.
If you turn the printer OFF when the
•
the printer memory will be erased. If there is any necessary print data remaining in the
printer, wait until it is output, or press [
> to output the data before turning the printer OFF.
シュツ
Do not turn the power OFF when the printer is in any of the following status:
•
- While the printer is in the middle of printing
- While the printer is running a self-diagnostic test immediately after turning the power
ON
- While a message informing you that the NVRAM is being initialized or being written is
displayed
- While <
indicator and Paper Source indicator for the currently selected paper source
00 インサツ カノウ
印刷可 Indicator
オンライン Indicator
00 ｲﾝ ｻﾂ ｶﾉ ｳ
> is displayed
02 キドウチュウ
>, <00 LIPS>, or <00 ESC/P> appears in the
A4
Size of paper in the currently
selected paper source
indicator is on, all the print data remaining in
ジョブ
] in the offline state and then select <
リセット
indicator,
オンライン 印
ハイ
3