Time Setting - Technoline WS 9117 Instruction Manual

3. Press "SET/CH" key to confirm and enter the time setting mode.

TIME SETTING :

Following from the Celsius or Fahrenheit degree mode.
1. The Hour digit in the time section starts flashing
2. Using the "MIN/MAX/+" key, to set the hours of the current time and then followed
by pressing the "SET/CH" key to advance to the minute mode
3. Again, using the "MIN/MAX/+" key, to set the minutes of the current time and then
finally followed by pressing the "SET/CH" key to exit the setting mode. Your
Temperature Station is now fully operational.
45