Via A Connection Code - Grundfos CIM 060 Installation And Operating Instructions Manual

5.2 Via a connection code

You can setup a connection code to avoid having to
press the connection button each time and to restrict
remote access to the product.
5.2.1 Setting the code in the product
1. Connect Grundfos GO to the product via the
connection button. See section
Grundfos GO.
2. In the product dashboard, select [Settings].
See fig. 7.
3. Choose [Connection code].
4. Enter the wanted code and press [OK].
The code must be a character string (ASCII).
The code can always be modified. The old code is
not needed.
After setting a connection code, you must
switch off the product for five seconds
Note
before you can use the new connection
code.
Fig. 7 Product dashboard in Grundfos GO
8
5.2.2 Setting the code in Grundfos GO
You can define a default connection code in
Grundfos GO so that it automatically attempts to
connect to the selected product via this code.
When a product with the same connection code is
selected in Grundfos GO, the Grundfos GO
automatically connects to the product without having
5. Connecting
to press the connection button on the module.
Define the default code in Grundfos GO in this way:
1. In the main menu, under [General], select
2. Choose [Remote].
3. Enter the connection code in the field "Preset
You can always modify the default connection code
by pressing [Delete] and entering a new one.
If Grundfos GO fails to connect and ask for pressing
the connection button on the product, it means that
the product has no connection code or has a
different connection code. In this case, you can only
establish connection via the connection button.
[Settings]. See fig. 6, pos. 2.
connection code". The field now says
"Connection code set". See fig. 8.
Fig. 8 Presetting the connection code in
Grundfos GO