Product Overview; Led - Grundfos CIM 060 Installation And Operating Instructions Manual

3.2 Product overview

1
2
1
3
4
Fig. 1 CIM 060
Pos. Description
1 Mounting holes
Connecting plug for the product
2
(visible on the back of the CIM 060)
3 Connection button
4

LED

5 On-board antenna
6 Connector for external SMA antenna
3.3 LED
Indicator
Light off
Short
green
flashes
5
Long green
flashes
6
Permanent
ly green
Red
flashes
See also installation and operating instructions of the
Grundfos GO.
Description
The module receives data from the
product but is not connected to any
Grundfos GO system.
Power is off.
The product in question is highlighted
in the Grundfos GO display and the
wink button has been pressed.
The LED flashes to inform the user of
the location of the highlighted pump.
The product in question is selected in
the Grundfos GO menu.
The module is prompting the user to
press the connection button in order
to connect to Grundfos GO.
The product is connected to
Grundfos GO. The indicator light is
on as long as the product is selected
in Grundfos GO.
Error/no connection available.
The power has for example just been
switched on and the module is
waiting to receive data from the
product. It ceases flashing when the
module is ready for connection.
5