English (GB) Installation and operating instructions
Original installation and operating instructions
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations and accepted codes of good
practice.
1. Symbols used in this document
Warning
If these safety instructions are not
observed, it may result in personal injury.
Warning
If these instructions are not observed, it
may lead to electric shock with consequent
risk of serious personal injury or death.
If these safety instructions are not
Caution
observed, it may result in malfunction or
damage to the equipment.
Notes or instructions that make the job
Note
easier and ensure safe operation.
4
2. Abbreviations
CIM
Communication interface module
Page
CIU
Communication interface unit
4
CU
Control unit
4
GND
Earth connection
4
Global system for mobile
GSM
4
communications
5
LED
Light-emitting diode
5
SEG
Sewage grinder pump
6
SELV
Separated or safety extra-low voltage
6
7
Separated or safety extra-low voltage
SELV-E
with earth
7
7
SMA
Subminiature version A
8
TTL
Transistor to transistor logic
9
3. Product description
9
9
3.1 Introduction
The CIM 060 is an add-on module which you can
instal in a CIU 902 SEG AUTO
unit or a CU 362 Dedicated Controls system to
enable radio communication with the Grundfos GO.
The on-board antenna enables connection to
Grundfos GO within a 10 meters radius. You can fit
an external antenna for a larger communication
range.
You can establish connection via a button on the
module or via a configurable connection code.
communication
ADAPT