Turning Off The Printer - Canon Laser Shot LBP-1310 User Manual

If no errors are found, the
selected paper feed indicator light up, and the message
appears on the display when the printer is ready to print.
The information shown on the display is as follows:
Ready to print and no
data is being
processed for printing.

Turning Off the Printer

The printer should be turned off as described in the following procedure.
IMPORTANT
•
If the printer is connected to a network, make sure that the printer is not printing data
from another personal computer before turning off the power.
•
If the power is turned off while the
memory of the printer is erased. Press
data, or wait until printing is complete, before turning off the power. (See "Canceling
Printing," on P. 58)
•
Do not turn off the power to the printer while it is printing.
•
Do not turn off the power to the printer during the self-diagnostic test performed
immediately after the power has been turned on.
•
If the message that the NVRAM is initializing or writing data is displayed, make sure that
the message has been canceled before turning off the power.
•
If the message that the Flash Memory is initializing or deleting data is displayed, make
sure that the message has been canceled before turning off the power.
オンライン
00 ｲﾝ ｻﾂ ｶ ﾉｳ A4
印刷可 メ ッセージ ジョブ
動作モー ド
ジョブキャンセル
ユーティリティ
給紙選択
リセッ ト／実行
オンライン
排出
00 ｲﾝｻﾂ ｶﾉｳ
indicator, the
印刷可
セッ トアップ
A4
indicator is on, any print data remaining in the
ジョブ
while offline to output any important print
［排出］
indicator and the
<00 インサツ カノウ >
Currently selected
paper feed size.
3