Table of Contents
Advertisement
IMPORTANT
•
If the postcards are warped, correct the warp so that it does not exceed 2 mm in an
upward direction before loading the stack into the multi-purpose tray.
•
If you are using postcards that have been cut badly they may overlap when
delivered. If you are using such postcards, fan the stack of postcards well, and then
load them in the paper tray.
3
Load the postcard stack in the multi-purpose tray.
If you want to print on the side that the address will be written, load postcards
with the print side of the postcards facing up and the top edge of the postcards
going into the printer first.
IMPORTANT
•
You can load up to 40 postcards. Make sure that the height of the stack does not
exceed the limit guide.
No more than 2 mm
Limit Guide
27
Advertisement
Table of Contents
