Table of Contents
Advertisement
When you are not using the multi-purpose tray, keep it closed.
Be sure to return the extension tray to its original position. To avoid damaging the
multi-purpose tray, do not close the multi-purpose tray with the extension tray left
open.
2
Tap the stack of paper on a flat surface to properly align the
edges.
IMPORTANT
•
Be sure to load a stack of transparencies or labels after thoroughly fanning them.
Otherwise, they may overlap when they are fed into the printer, causing paper
jams.
•
When fanning or aligning transparencies, always hold the edges, where possible,
to avoid touching the print side.
•
Take care not to mark/stain the print side of transparencies with fingerprints, dust
or oil. This may cause poor printing.
•
If the leading edge of the paper is bent or curled, straighten out the paper before
loading it into the tray.
•
If you are using paper that has been cut badly, sheets may overlap when delivered.
If you are using such paper, fan the stack of paper well, and then load it into the
tray.
1
2
23
Advertisement
Table of Contents
