Advertisement
Electrical system
Press the selection button to access the tyre
circumference adjustment.
E.g.: The tyre circumference is 1,300 mm.
Press the selection button to change to the
digit to be adjusted. E.g.: The original adjust-
ment is 1,000mm.
The 1 flashes.
N.B.: Tyre circumference adjustment interval:
300~2,500 mm; the digits are adjusted from
left to right.
Test it! The valve can be taken as a starting point and
end point for measuring the circumference of the wheel
with a tape measure.
Press the adjustment button to change the ad-
justment.
The 0 flashes.
Press the selection button 3 times to change to
adjustment of the sensor points.
E.g.: The circumference of the tyre has been
changed from 1,000 mm to 1,300 mm.
Chassis
Advertisement
