Advertisement
Electrical system
Adjustment of the speed measurement unit.
On the main screen, hold down the selection
and adjustment buttons for 3 seconds to
access the adjustment of the speed measure-
ment unit.
Press the adjustment button to select the
unit of measurement.
E.g.: Now the setting is km/h.
Now the speed measurement unit is flashing.
N.B.: On the adjustment screen for the speed
measurement unit, the user can choose bet-
ween km/h or MPH.
The odometer and the trip meter change along
with the speed measurement unit.
Press the selection button to continue adjus-
ting the function.
N.B.: When this screen is exited, the adjust-
ment defined will begin to be applied.
If adjustment of this function alone is required,
hold down the selection button for three se-
conds to go back to the main screen.
Tyre circumference and adjustment of the sensor points (to change to a
different tyre size).
On the main screen, hold down the selection
and adjustment buttons for 3 seconds to
access the adjustment of the speed measure-
ment unit.
Chassis
Advertisement
