Index - Siemens POWER CONTROL Series Operation Manual

3PCI SCR Power Controller Series Manual

INDEX

Note that locator page numbers appear in regular type faces for standard index references (e.g., 7-10).
For index references that correspond to items found in tables, the locator page numbers are shown in an
italic type face (e.g., 6-24).
illustrations, the locator page numbers are shown in a boldface type face (e.g., 3-3). Illustrations that
appear in tables have locator page numbers that are both boldface and italic (e.g., 6-16).
—Numbers—
3PCI power controller, 1-1
50/60 Hz operation, 1-1
—A—
AC input, 2-2
air flow, 2-1
ambient temperature, 5-4
change, 1-4
range, 1-4
analog voltmeter, 3-1, 3-2
auto/manual control with a controller and
potentiometer, 3-1, 3-3
auto/manual control with controller and remote
potentiometer, 3-3
auto/manual switch, 3-3
automatic operation, 3-2
automatic restart circuitry, 1-1
—B—
bias, 1-4, 2-2, 3-1, 3-2, 4-1, 5-5
bias control, 1-2, 4-1
branch circuit overcurrent protection, 2-2
—C—
calibration, 3-2, 3-3, 3-4, 4-1
CID option, 1-5
circuit breaker, 3-1, 3-2, 3-3, 5-1
circuit protection, 1-2
conductor size, 2-2
connections
operating with an adequate load, 3-1, 5-1
contamination, 5-4
control circuit, 1-2
control methods, 1-2, 1-4, 3-1
control setting, 1-3, 5-5
control signal, 1-1, 1-3, 2-4, 3-2, 4-1, 5-1
input impedance, 1-4
isolation, 1-4
controller output, 1-3, 3-2
controlling several 3PCIs connected in parallel,
3-1, 3-4
cooling fans, 2-1
corrosion, 5-5
i
For index references that correspond to items found in figures and
s
cosine intercept, 1-1
current, 1-5
current adjust, 2-2
current imbalance detection, 1-5
current level, 1-2, 1-3, 4-1
maintaining a constant, 1-3
current limit, 1-3, 1-4, 4-1
current limit control setting, 1-3
current ratings, 1-4, 1-5, 2-1, 2-2
current regulation, 1-3, 1-5
range, 1-3
current transformer, 1-2, 1-3, 2-2
—D—
digital firing control circuit, 1-2
dimensions, 1-2, 6-4
drawing list, 6-4
dry contact closure, 1-4
—E—
electrical hazards, 3-3, 5-1
electronic fuse, 1-2
electrostatic discharge, 2-1, 5-1, 5-4
electrostatic discharge precautions, 5-4
e-mail, 6-1
environmental issues, 5-4
ESD protection, 2-1
excessive vibration, 5-4, 5-5
extended ramp, 1-3
external control methods, 1-2
external controller signal, 3-1
external feedback, 2-3
—F—
fan cooling power, 1-4
fan wiring, 2-1
fan-cooled models, 2-1
fast-gate shutdown, 1-2
fax, 6-1
features, 1-1
feedback signal, 1-3
firing control, 5-5
firing control circuit, 1-2
frequency, 1-4
full output unaffected by control signal change,
5-1
Index
Version 1.2 (19000325)