Table of Contents
Advertisement
Available languages
Available languages
Accessories
Dual Mode Virtual Wall
®
Barrier*
Note:
For best results, place at least 8 feet (2.5 metres) from the Home
Base.
Use the Dual Mode Virtual Wall
barrier to keep the robot in the places
®
you want cleaned — and out of the ones you don't. It creates an
invisible barrier that only the robot can see. You can leave the device
in position between cleanings.
*Dual Mode Virtual Wall included for selected models only
Choose the mode to meet your needs:
When the switch is in the Virtual Wall position (
Virtual Wall Mode:
device will create a linear barrier to block openings up to 10 feet (3 metres).
This barrier gets wider as it gets further from the device (refer
Note:
to illustration).
Toggle the switch to the Halo position (
Halo Mode:
circular barrier. This will prevent the robot from approaching zones you
want to protect such as a pet bowl, vase, or under a desk. The Halo
barrier extends approximately 12 inches (30 centimetres) from the centre
of the device.
Note:
The batteries will last about 8–10 months under normal use. If you are
not planning to use your Virtual Wall barrier for an extended period of time,
be sure to turn the switch to the Off, or middle position.
), to create a
Roomba
i1/i3/i4 Owner's Guide
®
), the
EN
4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba i1 and is the answer not in the manual?
Questions and answers
Can I go back and start from the beginning with my iRobot, is there a reset button
To reset your iRobot Roomba i1, remove it from the Home Base and press and hold the CLEAN button for 10 seconds. This will turn the robot off. Then, store it in a cool, dry place if needed.
This answer is automatically generated