Table of Contents
Advertisement
Available languages
Available languages
Cleaning the Full Bin Sensors
Remove and empty the bin.
1
2
Wipe the inner sensors with a clean,
dry cloth
Wipe the bin door with a clean, dry cloth.
3
Closed Door
Opened Door
Washing the Bin
Do not wash the filter. Remove
Important:
the filter before washing the bin.
Release the bin, remove the filter,
1
and open the bin door.
2
Rinse the bin using warm water.
Bin is not dishwasher safe.
Note:
Make sure the bin is completely dry.
3
Reinsert filter and place bin back in
the robot.
Cleaning the Edge-Sweeping Brush
Use a small screwdriver to loosen the
1
screw holding the Edge-Sweeping Brush
in place.
Pull to remove the Edge-Sweeping
2
Brush. Remove any hair or debris, then
reinstall the brush.
Roomba
i1/i3/i4 Owner's Guide
®
EN
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba i1 and is the answer not in the manual?
Questions and answers
Can I go back and start from the beginning with my iRobot, is there a reset button
To reset your iRobot Roomba i1, remove it from the Home Base and press and hold the CLEAN button for 10 seconds. This will turn the robot off. Then, store it in a cool, dry place if needed.
This answer is automatically generated