Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for InfiRay Cabin Series
Summary of Contents for InfiRay Cabin Series
- Page 1 Cabin Series Operating Manual V1.0 InfiRay Technologies Co., Ltd.
-
Page 2: Specifications
Specifications Model CAD25 Detector Specifications Type CMOS Resolution 1440×1080 Pixel size, μm Frame Rate, Hz Optical Specifications Objective Lens, mm 22/25 13.1º × 9.9º Visual Magnification, × Digital Zoom, × Eye Relief, mm Focusing range of eyepiece, D -5～+5 Detection Range, m (Target size: 1.7m×... -
Page 3: Package Contents
It is both a handhold device for independent usage and a night vision rear attachment. The Cabin series is lightweight, compact and easy to carry, and can be operated with one hand. The battery can be quickly removed. Its well-designed features bring you good user experience. With a built-in fill-in light, it can be widely applied to hunting, searching, and locating under extremely low illuminations. -
Page 4: Device Composition
PIP (picture-in-picture) function; Convenient operation interface IV. Device Composition 1. Lens cap 2. Laser pointer 3. Fill-in Light 4. Type-C interface 5. Power button 6. Up button (zoom button) 7. M button (menu button) 8. Down button (camera button) 9. - Page 5 Open/Exit the main Home screen Open the shortcut menu menu Adjust specific parameters Exit the shortcut menu Shortcut Menu of a function M button Adjust specific parameters Save and go back to (Menu button) Main menu of a function/Go to the next the home screen interface level...
-
Page 6: Battery Charging
VI. Battery Charging The Cabin series is supplied with a quickly removable 18650 Li-ion battery pack, which enables the device to be used for up to 8 hours. The battery should be fully charged before first use. Method 1: Type C Charging ... -
Page 7: Battery Pack Installation
Close the pick (14) to complete the battery pack installation; The Cabin series can only be powered by this battery pack. If other batteries are used, it may cause irreparable loss, damage the device, and even may cause fire. -
Page 8: External Power Supply
Please keep the battery pack out of the reach of children. VII. External Power Supply The Cabin series supports external power supplies, such as the portable power source (5V). Connect the external power supply to the Type-C interface (4) of the device;... -
Page 9: Installation And Usage
USB icon , and the power indicator is green; When the external power supply is disconnected, the Cabin series device will automatically switch to the battery pack and will not shut down. VIII. Installation and Usage... -
Page 10: Digital Zoom
XI. Photo Taking and Video Recording The Cabin series is equipped with a built-in 16 GB memory card, which allows photo taking and video recording. The image and video files recorded will be named after time and stored in the memory, so it is recommended to set the system date and time in the main menu ("Main Menu -... - Page 11 right corner of the display, with the time format as 00:00:00 (hours: minutes: seconds); During recording, you can also take a photo by pressing the Down button (8); Stop the recording and save the video by pressing and holding the Down button (8); ...
-
Page 12: Status Bar
6. Wi-Fi status ( : Wi-Fi is off; : Wi-Fi is on) 7. Clock (set in the main menu or synchronize the time in the InfiRay Outdoor App) 8. Power status of the battery pack (When the inside of the icon is in green , it means that the power is higher than 20%;... - Page 13 Image mode: After selecting this option, press the Menu button (7) to circularly switch among image modes in a sequence of day mode and night mode; Screen brightness: After selecting this option, press the Menu button (7) to adjust the screen brightness among 1-5 levels;...
- Page 14 During the continuous operation of the thermal imager, when exiting from the main menu, the cursor remains at the position before exiting. When you restart the thermal imager and go to the main menu for the first time, the cursor stays at the first menu option. Composition and Description of Main Menu Enabling/Disabling Wi-Fi ...
- Page 15 Compensation Press the Up button (6) or Down button (8) to select the "Exposure Compensation" function option; Press M button (7) to go to the "Exposure Compensation" function option screen; Press the Up button (6) or Down button (8) to adjust the exposure compensation value as required;...
- Page 16 rightward or downward. One press moves a pixel and pressing and holding for one time moves the red cursor by 10 pixels each time; After finishing moving the cursor, press the M button (7) to save the setting and exit. The icon X ↔ or Y ↕ stops blinking; ...
- Page 17 Press and hold the M button (7) to open the main menu; Press the Up button (6) or Down button (8) to select "Settings". Setting the system date Press the M button (7) to open the secondary menu of "Settings";...
- Page 18 accordingly. Selecting the language Press the M button (7) to open the secondary menu of "Settings"; Press the Up button (6) or Down button (8) to select "Language"; Language Press the M button (7) to open the secondary menu for language selection;...
- Page 19 factory reset; Press the Up button (6) or Down button (8) to select "Yes" for restoring factory settings or "No" for canceling the operation; Press the M button (7) to confirm the selection; If "Yes" is selected, the device will shut down automatically;...
-
Page 20: Pip Function
4.0× , 8.0× , 12.0× , or 16.0× , respectively. XVII. Stadiametric Rangefinding The Cabin series provides stadiametric rangefinding, which allows you to calculate the approximate distance from a target with a known size. This function cannot be used when a day scope is connected. - Page 21 Press the Down button (8) + M button (7) again to turn off the LED lights, and the icon in the status bar is displayed as XXI. Wi-Fi The Cabin series has a built-in Wi-Fi module. The device can connect wirelessly to a mobile apparatus (laptops or smartphones) via Wi-Fi. ...
- Page 22 Setting Wi-Fi name and password The Cabin series allows you to change the name and password of the device Wi-Fi in the app. After the device is connected to the mobile device, locate the "Settings" icon in the InfiRay Outdoor image screen and tap it to open the "Settings"...
-
Page 23: Technical Inspection
About InfiRay Outdoor You can download and install the InfiRay Outdoor app on the official website (www. infirayoutdoor.com) or an app store. Alternatively, you can scan the QR code below to download it for free. After installing the app, open it. -
Page 24: Product Maintenance
Status of the rechargeable battery (fully charged in advance) and electrical contact (no salinization or oxidation). XXIV. Product Maintenance The device must be maintained in the following ways at least twice each year: Wipe the surface of metal and plastic parts to clear off dust and dirt by using a cotton cloth. Apply silicone grease if required. - Page 25 The display is not bright Images are too dark Adjust the display brightness enough Rotate the lens focus knob to adjust the The lens is not focused focus. Icons are clear but Wipe the outer optical surface by using The inner or outer optical images are blurry a soft cotton cloth or leave the device surface of the lens is dusted or...
- Page 26 FCC Caution. § 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. §...
- Page 27 Body-Support Operation This device was tested for typical body-support operations. To comply with RF exposure t be maintained between the user’s requirements, a minimum separation distance of 0cm body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components.