DeWalt XR LI-ION DCN662 Original Instructions Manual page 42

EnGLIsh
Battery Type
The following tools operate on a 18 volt battery pack: DCN662
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCB546, DCB547, DCB548. Refer to Technical
Data for more information.
Package Contents
The package contains:
1 Nailer
3 Non‑mar tips
1 Charger
1 Li‑Ion battery pack (C1, D1, G1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li‑Ion battery packs (C2, D2, G2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li‑Ion battery packs (C3, D3, G3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
nOTE: N and NT versions are not supplied with batteries or
a charger.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Length of nails.
Shank diameter.
Nail gauge.
Magazine capacity.
No additional lubrication.
Tool voltage.
Magazine angle: 0˚.
40
Date Code Position (Fig. B)
18
The date code , which also includes the year of manufacture,
is printed into the housing.
Example:
2021 XX XX
Year and week of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1 Trigger
2 Trigger lock‑off
3 Depth adjustment wheel
4 Headlights/low battery/
stall indicator
5
Jam clearing latch
6 Contact trip
7 Sliding magazine
8 Bump/sequential
selector switch
Intended Use
Your cordless finish nailer has been designed for driving nails
into wooden workpieces.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
Your cordless finish nailer is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
Belt Hook (Fig. A)
The cordless nailers include an integrated belt hook and can
be attached to either side of the tool to accommodate left‑ or
right‑handed users.
If the hook is not desired at all, it can be removed from the tool.
To Remove Belt Hook
1. Remove battery pack from tool.
9 Reversible belt hook
10 No‑mar pad
11 No‑mar pad storage
12 Stall release lever
13 Nail depth indicator
14 Battery pack
15 Battery release button
16 Pusher assembly
17 Belt hook screw
WALT battery packs and chargers.
e