DeWalt XR LI-ION DCN662 Original Instructions Manual page 34

EnGLIsh
18V XR 16 GA STRAIGHT FINISH NAILER
DCN662
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Actuating mode
Fasteners
length
shank diameter
angle
Drive energy
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-16
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
32
EC‑Declaration of Conformity
o
Machinery Directive
WALT one of the
e
18V XR 16 GA Finish Nailer
DCN662
DCN662
V 18
DC
WALT declares that these products described under Technical
D
e
1
Data are in compliance with:
Li-Ion
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑16:2010.
Sequential /
These products also comply with Directive 2014/30/EU and
Bump
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
mm 32–64
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
mm 1.6
0°
J 48
kg 2.4
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
dB(A) 83
65510, Idstein, Germany
08.01.2021
dB(A) 94
a
dB(A) 3
m/s 2 <2.5
Definitions: Safety Guidelines
m/s 2 1.5
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.





WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e