Related Manuals for Sonoff MINIR3
Summary of Contents for Sonoff MINIR3
- Page 1 MINIR3 User manual V1.2 LOut L in Smart Switch FCC Warning 中 文 ----------1-5 English----------6-11 ----------12...
- Page 2 Shenzhen Sonoff Technologies Co., Ltd. 中⽂ 产品介绍 Wi-Fi信号指⽰灯(蓝⾊) 开关指⽰灯(红⾊) 配对按钮 开关按钮 L in LOut 设备重量＜1Kg， 建议安装⾼度＜2⽶。 功能特点 MINIR3是⼀ ⼤可连接16A电器的智能开关。 带有 “轻智能⽹关” 功能， 轻智能⼦设备添加⾄⽹关后可 本地近距离控制⽹关的开关， 也可通过云端在智能场景中设置联动触发其他智能设备。 远程控制 智能定时/延时 语⾳控制 分享功能 智能场景 “轻智能” 控制 点动模式 DIY模式 组功 局域⽹功能 使⽤说明 1.断电 设备安装、 故障维修请由专业资质电⼯操作。 切勿在设备通电时进⾏接线操作或触碰到接线端⼦， 以免...
- Page 3 Shenzhen Sonoff Technologies Co., Ltd. 中⽂ 2.接线 接线前先拆下保护盖: 灯具接线⽰意： L in LOut 100-240V AC LIn LOut 电器接线⽰意: L in LOut 阻性负载 LIn LOut 100-240V AC 确保线路接⼊⽆误后， 再合上保护盖。 3.下载 “易微联” App 易 微 联 eWeLink Android™ & iOS...
- Page 4 添加设备 所有设备 快速添加 适用于大部分易微联生态设备 扫码添加 声波添加 GSM 类设备和附带 适用于摄像头等支持 二维码的设备 声波配对设备 蓝牙配网 适用于蓝牙配网 点击 “+” ， 选择 “ 蓝⽛配⽹” ， 再根据APP提⽰进⾏操作。 轻智能⼦设备 进⼊APPMINIR3设置⻚⾯， 点击轻智能⼦设备， 然后触发⼦设备， 即可添加成功。 设备设置 MINIR3 快捷设置 位置管理 > > 分享设备 > 创建群组 添加 > ⼩程序控制 局域⽹控制...
- Page 5 PC V0 产品规格 54x45x24mm Wi-Fi信号指⽰灯状态说明 指⽰灯状态 状态描述 两短⼀⻓闪烁 蓝⽛配⽹模式 快速闪烁 DIY配对模式 常亮 设备在线 快闪⼀下 未连接路由 快闪⼆下 已连接上路由器， 但未连接到云端 快闪三下 固件升级中 DIY模式 DIY模式专为希望通过现有家庭⾃动化开源平台或本地HTTP ⼾端⽽不是eWeLinkApp 制 SONOFF 设备的IoT ⾃动化⽤⼾和开发⼈员⽽设计 (https://sonoff.tech)。 如何进⼊DIY配对模式: ⻓按设备配对按钮5秒直到Wi-Fi 指⽰灯呈 “两短⼀⻓闪烁” 状态， 松开。 再次设备⻓按配对按钮5 Wi-Fi指⽰灯呈 “快闪” 状态， 此时设备进⼊DIY配对模式。 三分钟内没进⾏配⽹,设备将退出DIY配对模式。...
- Page 6 Shenzhen Sonoff Technologies Co., Ltd. 中⽂ 恢复出⼚设置 在eWeLinkAPP端“删除设备”，设备即恢复出⼚设置。 常⻅问题 Wi-Fi设备与eWeLinkAPP配对失败。 1.确保设备处于配对模式。 三分钟内没进⾏配⽹， 设备将⾃动退出配对模式。 2.请开启定位服务并允许定位权限。 在选择Wi-Fi 络之前， 请开启定位服务并允许定位权限。 位置信息权限⽤于获取Wi-Fi列 。 果单击禁⽤， 您将⽆法添加设备。 3.确保您的Wi-Fi 络为2.4GHz频段。 4.确保您输⼊了正确的Wi-FiSSID和 码， 没有包含特殊字符。 密码错误是配对失败的⼀个 ⾮常常⻅的原因。 5.配对时设备应靠近路由器， 以保证良好的传输信号条件。 Wi-Fi设备 “离线” 问题， 请通过Wi-FiLED指⽰灯状态检查以下问题： LED指⽰灯每2 闪烁⼀次， 表⽰您⽆法连接到路由器。 1.可 您输⼊了错误的Wi-FiSSID和 码。...
-
Page 7: Product Introduction
The device weight is less than 1 kg. The installation height of less than 2 m is recommended. Features MINIR3 is a smart switch that can connect up to 16A electrical appliances. With the "eWeLink- Remote gateway" function, the eWeLink-Remote sub-devices can be added to the gateway to control the switch of the gateway at close range locally, and can also trigger other smart devices in the smart scene through the cloud. - Page 8 Shenzhen Sonoff Technologies Co., Ltd. English 2. Wiring instruction Before wiring, please remove the protective cover: Light fixture wiring instruction: L in LOut 100-240V AC LIn LOut Appliance wiring instruction: L in LOut LIn LOut 100-240V AC Resistive load Close the protective cover after confirming the wiring is correct.
- Page 9 Shenzhen Sonoff Technologies Co., Ltd. English 3. Download the eWeLink App eWeLink eWeLink Android™ & iOS 4. Power on L in LOut After powering on, the device will enter the bluetooth pairing mode during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release. The device will exit the bluetooth pairing mode if not paired within 3mins.
-
Page 10: Specifications
Shenzhen Sonoff Technologies Co., Ltd. English Add eWeLink-Remote Sub-devices Enter the MINIR3 setting page, click eWeLink-Remote sub-devices on the App and trigger the sub-device by pressing the button on the device, then it will be added successfully. MINIR3 DeviceSettings Shortcuts >... -
Page 11: Factory Reset
DIY Mode The DIY Mode is designed for IoT home automation users and developers who would like to control the SONOFF device via existing home automation open-source platforms or local HTTP clients instead of the eWeLink App(https://sonoff.tech). How to enter the DIY Pairing Mode: Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of two short flashes and one long flash and release. -
Page 12: Common Problems
Shenzhen Sonoff Technologies Co., Ltd. English Common Problems Fail to pair Wi-Fi devices to eWeLink APP 1. Make sure the device is in pairing mode. After three minutes of unsuccessful pairing, the device will automatically exit pairing mode. 2. Please turn on location services and allow location permission. Before choosing the Wi-Fi network, location services should be turned on and location permission should be allowed. -
Page 13: Fcc Warning
Shenzhen Sonoff Technologies Co., Ltd. FCC Warning FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could avoid the user ’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 14 Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type MINIR3 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals Shenzhen Sonoff Technologies Co., Ltd.