Flexcom LK720A Installation And Operating Instructions Manual page 18

Flexcom Communication Ltd
General settings
Function
Change password
Administrator phone
number
Delete administrator
phone number
Setting time zone
Set the upload
frequency
Sleep mode
Description
Change the factory default
password (123456).
After setting the
administrator phone
number (s), the device
only accepts calls and SMS
commands from this
number (s) and sends
alerts to this phone
number (s). Up to 5 such
phone numbers can be set
on the machine. After
setting the first phone
number, further ones can
only be entered with SMS
sent from this number.
Delete a previously set
administrator phone
number.
The device default time
zone is set to GMT + 0.
This is changed (eg in the
case of Hungary, the time
zone is GMT + 1), as
follows.
If you use the service
provider's software
service, the device sends
data to the central server
at specified intervals. You
can set the sending
frequency as follows:
In normal mode, the
device switches to sleep
mode after 10 minutes of
inactivity and inactivity to
save energy. It switches
back to active mode for
any SMS message or
move. Sleep mode can
also be turned on or off via
SMS:
Installation and operating instructions (2021/03/23)
SMS message
password<old password> <new password>
Example: password123456 876543
The password must be a 6-digit Arabic
number.
If you have subscribed to and use the reseller's
software service, do not change the default
factory password!
admin123456 phone number
Example: admin123456 0036709876543
When entering the telephone number,
use
the country code prefix (eg 0036,
Hungary).
noadmin123456 phone number
Example: noadmin123456 003612345678
timezone123456 value (where value:
érték pl. +1, -2,
0 etc.).
Example: timezone123456 +1 (Hungarian
time zone
setting)
upload123456 időköz (másodperc)
Example: upload123456 60 (sending
data every minute)
Activate: sleep123456
Deactivate:nosleep123456
18/23
Device
response
Password
OK
Admin Ok
Admin Ok
Time Ok
Upload
Ok
Sleep Ok
or
Nosleep
Ok.