Table of Contents
Advertisement
EN - English
Operating instructions
Dear Customer,
many thanks for the confidence you have shown in us with the purchase of your new Laguna Tools machine. This manual has been
prepared for the owner and operators of an IGM LAGUNA Revo 1216 Woodturning Lathe to promote safety during installation,
operation and maintenance procedures. Please read and understand the information contained in these operating instructions and the
accompanying documents. To obtain maximum life and efficiency from your machine, and to use the machine safely, read this manual
thoroughly and follow instructions carefully.
We wish you many work and personal pleasures when working with the Laguna Tools machine.
Table of Contents
9. Maintenance
1. Declaration of Conformity
We declare that this product is in compliance with the directive and the
standard mentioned on the previous page of this manual.
2. Warranty
The company IGM Tools & Machinery s.r.o. always strives to deliver a
product of high quality and efficiency.
The application of the warranty is governed by the valid Business
Conditions and the Warranty Conditions of the company IGM Tools &
Machinery s.r.o.
3. Safety
3.1 Authorized Use
Lathe is designed for sanding wood and wooden products only.
Sanding of other materials is not permitted.
www.igmtools.com
(Translation of original)
The required minimum age must be observed.
The machine must only be used in a technically perfect condition.
In addition to the operating instructions, also read the safety requirements
and your country's applicable regulations.
You should observe the generally recognized technical rules and safety
requirements concerning the operation of woodworking and metalworking
machines.
Neither the manufacturer nor the supplier is liable for damage resulting
from unauthorized use of the machine.
Responsibility is transferred exclusively to the operator.
3.2 General Safety Notes
Woodworking machines can be dangerous if not used properly.
Read and understand the entire operating manual before attempting
assembly or operation.
Protect this operating manual from dirt and humidity, and pass it over to
the new owner if you part with the machine.
No changes to the machine may be made.
Tighten all loose parts and locks before operating.
Daily inspect the function and existence of the safety appliances before
you start the machine. Correct all defects or damaged safety appliances
immediately. The machine must only be used in a technically perfect
condition.
Make all machine adjustments or maintenance with the machine
unplugged from the power source.
Protect long hair with a cap or hair net. Remove all loose clothing, rings,
watches and other jewellery. Wear safety shoes; never wear leisure shoes
or sandals. Do not wear gloves while operating this machine!
Follow personal protection guidelines.
Always wear safety goggles. Always wear ear protection. Tools are sharp
and can lead to serious injuries, handle them with care.
Install the machine so that there is sufficient space for safe operation and
workpiece handling.
The machine must be bolted on firm and levelled surface and must be
properly lighted.
Only process workpieces without defects.
Keep pulley cover closed!
Always use tool rest when turning.
Always wear a protective mask in a dusty environment.
Keep work area well lighted.
Make sure the machine stands on a board.
Make sure that the power cord does not impede work. Keep work area
clean. Work only with well sharpened and clean tools.
Never reach into the machine while it is operating or running down.
-3-
Advertisement
Table of Contents
