Table of Contents
Advertisement
English
The SEt to EngLiSh option is only available when the LCD
displays text in French, German, Spanish, or Portuguese.
1.
Use G or H to scroll to the SEt to EngLiSh
option.
2.
Press C to select the option.
The LCD automatically displays English text and
returns to the FiniSh OPtionS screen.
3.
Use G or H to scroll to a new user option, or press
C to exit user options and return to normal
operating mode.
Sensor Options
The sensor options are used to temporarily disable a sensor
and the corresponding fail alarm.
The detector will continue to function normally. The disabled
sensor can be enabled again at any time. The sensor should
be replaced and enabled as soon as possible.
a
Disabling an installed sensor configures the
detector to a 1, 2, or 3-gas unit. No protection is
provided for the gas targeted by the selected
sensor(s). Disabling a sensor should only be
performed with extreme caution.
To enable/disable a sensor, complete the following
procedures:
The following procedures example refers to the
toggLE H2S SEn option. The procedures are the
same for all of the sensors.
GasAlertMicro
User Options Menu
Warning
Note
23
Advertisement
Table of Contents
Troubleshooting
