Technical Data - EINHELL GE-CR 18 Li E Original Operating Instructions

For safety reasons, the machine may not be used
as a drive unit for other work tools or tool sets of
any kind.
This machine is not suitable for diffi cult soil (stony,
hard, etc.).
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Operating voltage: .................................. 18 V DC
Protection type: ............................................IPX1
Protection class: ................................................III
Idle speed n : ........................................230 min
0
Idling speed min – max: ..................190-230 min
Working width: ............................................20 cm
Hoeing ∅: ...............................................15.5 cm
Number of blades: ...................................... 4 pcs
Sound pressure level L
Uncertainty K : ........................................... 3 dB
pA
Measured sound power level L
Uncertainty K : .......................................... 3 dB
WA
Guaranteed sound power level L
Vibration at the long handle a
Uncertainty K: ........................................ 1.5 m/s
Weight: ..........................................................4 kg
Caution!
The machine is supplied without rechargeable
batteries and without a charger, and is allowed to
be used only with the lithium-ion batteries of the
Power X-Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power-X charger.
Anl_GE_CR_18_20_Li_E_SPK13.indb 19 Anl_GE_CR_18_20_Li_E_SPK13.indb 19
-1
-1
: ..................... 62 dB(A)
pA
: .... 74.94 dB(A)
WA
: ...... 93 dB(A)
WA
: ............ ≤ 2.5 m/s
2
h
2
- 19 -
GB
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Damage to hearing if no suitable ear protec-
tion is used.
2. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
3. Injury and damage to property caused by fl y-
ing parts.
09.11.2021 15:13:40 09.11.2021 15:13:40