Technical Data; Intended Use; Before Starting The Equipment - EINHELL GC-CT 18/24 Li Operating Instructions Manual

Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.

3. Intended use

The equipment is designed for cutting lawns
and small areas of grass in private and hobby
gardens.
Equipment designed for use in private and
hobby gardens is regarded as unsuitable for
use in public facilities, parks and sports centers,
along roadways, or in agriculture and forestry.
The operating instructions as supplied by the
manufacturer must be obeyed to ensure that the
equipment is used properly.
Important! This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Anl_GC_CT_18_24_Li_USA_SPK7.indb 10 Anl_GC_CT_18_24_Li_USA_SPK7.indb 10
EN

4. Technical data

Motor power supply: ............................ 18V
No load speed n ......................8500 RPM (min
0
Cutting width of blade ......................9-½" (24 cm)
Protection class ................................................III
Weight (Tool only): ...................... 2.87 lbs (1.3 kg)
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's construction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.

5. Before starting the equipment

5.1 Fitting the safety guard (Fig. 3-4)
Push the safety guard (Item 8) in the direction of
the arrow onto the motor housing as shown in
Fig. 3. Make sure that it latches in place correctly!
Make sure that the safety guard is fi tted as in Fig.
4.
5.2 Fitting the blade plate (Fig. 5-6)
Fit the blade plate (Item 7) onto the mounting
shaft and fasten it with the screw (Item 9).
5.3 Fitting the blade (Fig. 7)
Fit the larger opening of the blade (Item 6) onto
the blade mount (10) of the blade plate (Item 7)
- 10 -
)
-1
23.11.2022 15:01:28 23.11.2022 15:01:28