Technical Data; Before Starting The Equipment - EINHELL GC-ET 3023 Original Operating Instructions

The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage ................................ 230 V ~ 50 Hz
Power ........................................................ 300 W
Cutting circle ............................... Diameter 23 cm
Revolutions n .................................... 11000 rpm
0
Cutting line diameter ............................... 1.5 mm
Weight ........................................................1.5 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 50636-2-91.
L sound pressure level ........................ 76 dB(A)
pA
K uncertainty ........................................ 1.52 dB
pA
L sound power level ..................... 92.99 dB(A)
WA
K uncertainty ........................................ 1.52 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 50636-
2-91.
Vibration emission value a
K uncertainty = 1.5 m/s
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
Anl_GC_ET_3023_SPK7.indb 15 Anl_GC_ET_3023_SPK7.indb 15
= 2.511 m/s
2
h
2
- 15 -
GB
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
5.1 Assembling the grass trimmer
(Fig. 3a to 5b)
•
Plug together the top handlebar (Fig. 3a/Item
5) and the bottom handlebar (Fig. 3a/Item 6)
in the direction of the arrow. Secure the hand-
lebar parts with the screw (Fig. 3b/Item 10).
•
Push the additional handle (Fig. 4/Item 4)
onto the top handlebar (Fig. 4 / Item 5).
•
Plug the guard hood with screw (Fig. 5a/Item
7) onto the motor head as far as the stop.
•
Secure the guard hood with the screw (Fig.
5b/Item 8).
07.12.2023 16:10:27 07.12.2023 16:10:27