Intended Use; Technical Data - EINHELL GC-RT 18 Li Operating Instructions Manual

3. Intended use

The equipment is designed for cutting lawns and
small areas of grass in private and hobby gar-
dens.
Equipment designed for use in private and hobby
gardens is regarded as unsuitable for use in pub-
lic facilities, parks and sports centers, along road-
ways, or in agriculture and forestry. The operating
instructions as supplied by the manufacturer must
be kept and referred to in order to ensure that the
equipment is properly used and maintained.
Important. This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The equipment may be used only for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.

4. Technical data

Speed n .............................................8,500 min
0
Cutting circle .......................................... Ø 26 cm
Max. operating time ..................... approx. 60 min
Protection class ................................................III
L sound power level ...................... 88.3 dB (A)
WA
K uncertainty ............................................ 3.04 dB
Vibration ..................................................5.8 m/s
K uncertainty .......................................... 2.3 m/s²
Sound pressure level
at the operator's ear ............................... 78 dB(A)
K uncertainty ................................................. 3 dB
Guaranteed sound power level L
Weight ....................................................... 2.2 kg
Caution!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power-X-
Change series!
Anl_GC_RT_18_Li_SPK7.indb 16 Anl_GC_RT_18_Li_SPK7.indb 16
GB
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
The quoted vibration value was measured in ac-
cordance with a standardized testing method. It
might change according to how the electric tool is
used, and in exceptional circumstances it might
exceed the quoted value.
The quoted vibration value can be used to com-
pare one electric tool with another.
The quoted vibration value can also be used for
initial assessment of a harmful eff ect.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect condi-
tion.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
-1
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
2
longed period or is not properly guided and
maintained.
...... 96 dB (A)
WA
- 16 -
14.06.2023 10:20:03 14.06.2023 10:20:03