Machine Storage; Machine Care; Cleaning With Attachments - Bissell 1699V User Manual

M
aintenance and care

Machine storage

Once your cleaning is complete, make sure the
water tank is emptied and rinsed out. Put the
unit away in a closet or basement for the next
use. The SmartMix tank can remain filled and
ready to go (store with machine set to water
rinse setting), or it can simply be emptied back
into the formula bottle if that is more convenient.
Note: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
Freezing will damage internal components
and void the warranty.

Machine care

For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power and heater switches OFF ( 0 ).
Unplug the machine and wrap the power cord.
2.
After emptying the water tank, rinse it out at a
faucet with running hot tap water, taking care
to clean underneath the heavy duty bladder,
and all around it. Clean out lint trap.
3.
Replace the Tank-in-Tank on the machine.
4. Clean out the flow indicator filter each
time it is used to ensure best cleaning
performance. Unscrew the flow indicator
cap, lift out the red rotor and white filter.
Rinse all three parts with water. Replace the
filter and rotor. Replace the flow indicator
cap. Turn until snug, do not over-tighten.
5.
Any loose hair or debris can be pulled from
the brush roll if desired and thrown away.
6. Wipe the machine's exterior with a soft cloth.
7.
After carpet is dry, vacuum again to remove
hair and fuzz.

Cleaning with attachments

Your ProHeat machine comes equipped with a
hose and at least one attachment for cleaning
stairs, upholstery, and more.
1.
Important! If using to clean upholstery, check
upholstery tags for instructions.
12
w w w . b i s s e l l . c o m
ug310-5941_7901bi_608.indd 12
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
Flow Indicator
ON
ON
4.
8 0 0 . 2 3 7 . 7 6 9 1
6/24/08 1:39:03 PM