Please Do Not Return This Product To The Store - Bissell 1699V User Manual

T
roubleshooting
Cleaner not picking up solution.
Possible Causes
1. ReadyTools dial may be on the
wrong setting for the cleaning job.
2. Nozzle window may not be
properly attached.
3. Tank-in-tank lid is not properly installed.
4. Tank-in-tank is not properly seated.
5. Poor tool position.
(Hand held attachments only).
6. Tank-in-tank has picked up
maximum dirty water.
Other Maintenance or Service not included above should be performed by an
Thank you for selecting a BISSELL product.
If you should happen to need assistance during assembly or operations, call 1-800-237-7691

Please do not return this product to the store

B
ISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
Or visit the BISSELL website - www.bissell.com
When contacting BISSeLL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the
event of a warranty claim. See "About Your Warranty" on page 20 for details.
18
w w w . b i s s e l l . c o m
ug310-5941_7901bi_608.indd 18
authorized service representative.
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
Saturday
or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Remedies
1. Set ReadyTools dial to either floor
cleaning or tools.
2. Press down firmly on the black
oval gasket at the top window to
make sure the two tabs on the
back of the nozzle window are
snapped into the mating slots in
the main housing.
3. Re-install lid; refer to page 9.
4. Tank-in-tank must be firmly
seated to function; remove and
reseat tank-in-tank.
5. Adjust angle; apply more
downward pressure.
6. Empty tank-in-tank, refer to
page 11.
8 a.m. — 10 p.m. et
9 a.m. — 8 p.m. et
8 0 0 . 2 3 7 . 7 6 9 1
6/24/08 1:39:07 PM