Midea MLV45N1B Series User's Manual & Installation Instructions page 6

WARNING
Installation Warnings and Precautions
•
Plug the power cord into an AC 120V/60Hz wall socket rated at 15
amps or higher. Use the socket for this washer only. Do not use an
extension cord.
- Sharing a wall socket with another appliance, using a power strip,
or extending the power cord may result in electric shock or fire.
- Do not use an electric transformer. lt may result in electric shock or
fire.
- Make sure that the power voltage, frequency and current match
the product's specifications. Failing to do so may result in electric
shock or fire.
•
Remove all foreign substances such as dust or water from the power
plug terminals and contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failing to do so may result in electric shock or fire.
•
Plug the power plug into the wall socket in the right direction so that
the cord runs towards the floor.
- If you plug the power plug into the socket in the opposite direction,
the electric wires within the cable may be damaged and this may
result in electric shock or fire.
•
Plug the power plug into the wall socket firmly. Do not use a damaged
power plug or loose wall socket, because this may result in electric
shock fire.
• Do not pull or excessively bend the power cord. Do not twist or tie
the power cord.
•
Do not hook the power cord over a metal object. Place a heavy object
on the power cord, insert power cord between objects, or push the
power cord into the space behind the appliance, because this may
result in electric shock or fire.
•
Do not pull the power cord when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failing to do so may result in electric shock or fire.
•
If the power plug or power cord is damaged, contact your nearest
service center.
•
Do not install on carpet. Install the washer on a level and solid floor
that can support its weight. Failure to do so may result in abnormal
vibration, noise or problems with the product.
•
The washer is heavy. Two or more people may be needed to install
and move the appliance. Failure to do so may result in bodily or other
injuries.
•
Store and install the washer where it will not be exposed to
temperatures below freezing or exposed to outdoor weather
conditions. Failure to do so may result in serious leak damage.
•
Position the appliance so that the power plug is easily accessible.
Failure to do so may result in electric shock or fire due to an electrical
short circuit.
•
Failure to follow all of the safety warnings in this guide may result in
property damage or injury to persons.
6