Midea MLV45N1B Series User's Manual & Installation Instructions page 38

Caution
Never use the tub clean cycle when laundry is in your washer. This may
damage the laundry or your washer.
•
With the tub empty, add one cup of chlorine bleach to the bleach
dispenser.
•
Press the Power button.
•
Turn the cycle selector to Tub Clean. When you select Tub Clean, the
only options you can change is the delay option.
•
Press the Start Pause button.
Storing your washer
You can damage your washer if you do not remove water from hoses and
internal components before storage.
To prepare your washer for storage:
•
Select the Quick Wash cycle and add bleach to the washer. Run your
washer through the cycle without a load.
•
Turn the water faucets off and disconnect the inlet hoses.
•
Unplug your washer from the electrical outlet and leave your washer
lid open to let air circulate inside the tub.
Caution
If your washer has been stored in below-freezing temperatures, allow
time for any leftover water in your washer to dry out before use.
38