Using Pans - Fagor VFI400I Instruction Manual

Most stainless steel, enamel, iron,
ceramic and copper pans can be used
on vitroceramic hobs.
Aluminium pans are not recommended
as they may stain the vitreous surface,
unless they have stainless-steel covered
bottoms.
Hotplates should not be switched on
without a pan on top. The base of the
pan should be flat and dry. Pans that
have been used on gas cookers are not
normally quite flat and absorb heat
badly.
Make sure that the diameter of the pan
is at least that of the hotplate.
Avoid scarping pans over the
vitroceramic surface, as it may become
scratched. Always lift the pan.
Never use tinfoil or plastic containers.
They will melt and fuse permanently
with the vitroceramic surface.

USING PANS

22
YES
SI
ALUMÍNIUM
SATINLESS STEEL
SATINLESS STEEL
ENAMEL
CERAMIC
COPPER
ALUMÍNIUM