Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita 1804N Instruction Manual

ENGLISH
1. Knob
2. Lock button
3. Switch trigger
4. Bolts
5. Drum
6. Planer blade
7. Drum plate
8. Adjusting plate
9. Inside edge of gauge plate
10. Blade edge

SPECIFICATIONS

Model
Planing width
Planing depth
No load speed (min
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.... Read instruction manual.
Intended use
The tool is intended for planing wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. This tool
should be grounded while in use to protect the operator
from electric shock. Use only three-wire extension cords
which have three-prong grounding-type plugs and three-
pole receptacles which accept the tool's plug.
General Power Tool Safety
Warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
4
Explanation of general view
11. Screw(s)
12. Heel
13. Back side of gauge base
14. Gauge plate
15. Gauge base
16. Nozzle assembly
17. Rear cover
18. Chip cover
19. Start
20. End
-1
)
END224-1
ENE001-1
ENF001-1
GEA005-3
1804N
136 mm
3 mm
16,000
445 mm
7.8 kg
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
21. Sharpening holder
22. Wing nut
23. Blade (A)
24. Blade (B)
25. Side (D)
26. Side (C)
27. Limit mark
28. Screwdriver
29. Brush holder cap
1805N
155 mm
2 mm
15,000
7.9 kg