Operation - IKEA UPPKALLA Manual

ENGLISH

Operation

Control panel
1
Temperature button
Switching on
• Connect the mains plug to the power socket.
The display on the control panel turns
on. The temperature indicator shows the
currently set temperature.
• To change temperature, refer to the section
for temperature regulation.
When operating the appliance for the first time,
set the appliance at a colder temperature and
run it without loading any food until it auto
stops at the set temperature.Usually it takes 2
or 3 hours, then set the temperature regulator
at the desired setting and put food in the
appliance.
1 2
2
Temperature indicators
Switching off
Disconnect the mains plug from the power
socket. The display turns off.
Temperature regulation
1
• Press the temperature button to select a
desired temperature. The corresponding
temperature indicator turns on.
Fast freezing function
• Press and hold the
on the control panel for three seconds
to activate the function. Both 3° and 4°
indicators turn on.
1
temperature button
10
2