In order to activate your warranty, please register at www.bji.com. There you can review
our full warranty details and other helpful information. Or, you may call us at
866-851-3006, 8am - 5pm (EST), Monday – Thursday, 8am – 4pm(EST), Friday.
CAUTION: Read all the instruction before assembly. Failure to do so may result in faulty assembly and potential injury!
Assemble product on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to assemble
bulky or heavy items. After final alignment, make sure all bolts and nuts are securely tightened with screw head covers pressed in place.
PARTS NO.
A
B
C
D
E
F
G
H
Don't tighten Bolts until Product is completely assembled.
Step 1: Carefully turn the Upper Chair Frame (B) upside down on a non-abrasive surface, attach the Chair Base (A) to
the Upper Chair Frame (B) with M6x40mm Hex Head Bolt (E), Steel Washer (F). Once the alignment is correct, tighten
all the bolts and then cover all the bolts with Bolt Cap (G) as shown in Figure 1.
PARTS NAME
Chair Base
Upper Chair Frame
Cushion 1
Cushion 2
M6 x 40mm
Hex Head Bolt
Steel Washer (M6)
Bolt Cap
Open Wrench
WARRANTY
PART LIST
PARTS
Figure 1
Page 2 of 3
QTY
1
1
1
1
3
3
3
1