Conference Unit Installation And Settings - Toa TS-910 Series Instruction Manual

10. CONFERENCE UNIT INSTALLATION AND SETTINGS

Step 1. Use a screwdriver to set the Unit
address number setting switch
located on the unit's bottom side.
Set a numeral for the ones place
and tens place.
As for the hundreds place, shift
this switch to OFF for a numeral
"0" and to ON for "1."
Set the unit address number (001
– 192), taking care to ensure that
the same number is not duplicated
in the system.
If the number [000] is assigned to a unit, the user of that unit cannot speak. However, the unit can be
used for monitoring.
Note
This number is factory-preset to [000].
Step 2. Mount the microphone to the Conference
unit.
Step 3. Set the Priority operation, Priority chime mute, Voting activation, and Priority speech key operation
functions using the DIP switch located on the Chairman unit's bottom side.
Priority operation setting switch
Priority chime mute setting switch
Voting activation setting switch
Priority speech key operation setting switch
Priority operation setting switch
Priority chime mute setting switch
Voting activation setting switch
Priority speech key operation setting switch
Step 4. Turn on the same number of microphones on the Conference units as the maximum number of
simultaneous speakers set at the Central unit. Speaking into the microphone, adjust the Central unit's
Speech volume control to an appropriate level.
Step 5. Initiate speech from the microphones of all Conference units, and confirm that acoustic feedback is not
produced.
If feedback occurs, widen the distance between the Chairman unit and the Delegate unit or reduce the
output volume to prevent feedback.
When feedback still remains, use the FBS function built in the Central unit, or an external graphic
equalizer to suppress it. (Refer to "IF ACOUSTIC FEEDBACK OCCURS" on p. 42.)
30
Hundreds digit
Microphone (standard) TS-903
Microphone (long) TS-904
Setting switch
(Inside of the cover)
NOT USE
100
Tens digit
10
Ones digit
1
or
Factory-preset
position
RESET
OFF
OFF
PTT
(Inside the cover for TS-911)
RESET RESTORE PRIORITY
OFF ON CHIME MUTE
OFF ON
PTT ALT PRIORITY MODE
Conference unit
(bottom side)
UNIT ID
Conference unit
The figure shows the TS-911.
Chairman unit
(bottom side)
(Inside the cover for TS-811)
RESET RESTORE
OFF ON
VOTE NOT USE
PTT ALT
PRIORITY
CHIME MUTE
PRIORITY MODE