Parts And Features; Stand Mixer Attachment; Food Grinder Attachment - KitchenAid KJG01A Series Manual

PARTS AND FEATURES

STAND MIXER ATTACHMENT

Before Attaching Stand Mixer
Attachment
1� Turn Stand Mixer speed control to OFF�
2� Unplug mixer�
3� Loosen the attachment knob (A) by
turning it counterclockwise�
4� Remove the attachment hub cover or
flip up hub cover�
5� Insert the attachment shaft housing (B)
into the attachment hub (C) making
certain that attachment power shaft fits
into square hub socket�
6� It may be necessary to rotate the
attachment back and forth� When the
attachment is in proper position, the
pin on the attachment housing will fit
into the notch on the hub rim�

FOOD GRINDER ATTACHMENT

B
To Assemble Food Grinder Attachment
1� Insert the grind worm (A) into the grinder body (B)�
2� Place the knife (C) over the square shank at the exposed end of the grind worm�
3� Place grinding plate (D) over the knife, matching the tabs of the plate with the
notches of the grinder body�
4� Place ring (E) on grinder body, turning by hand until secured but not tightened�
NOTE: The combination food pusher/wrench (F) is used for removal of ring (E) only�
Do not use it to tighten ring (E)�
NOTE: Fruit/Vegetable Strainer (Model FVSP) is available to convert Food Grinder to
a Fruit/Vegetable Strainer�
Pasta Maker Plates (Model SNPA) are available to convert Food Grinder to a Pasta
Maker�
Sausage Stuffer (SSA) is available to convert Food Grinder to Sausage Stuffer�
W11307098A.indb 5
7� Tighten the attachment knob by turning
it clockwise until the attachment is
completely secured to mixer�
C
Fine Coarse
A
C
B
D
E
PARTS AND FEATURES | 5
A
F
11/13/2018 6:04:26 PM