Installation; Location; Ensuring Optimum Performance Of Your Appliance; Benefits Of Increased Ventilation - Sandstrom SWC32B11E Instruction Manual

Installation

INSTALLATION

Location

When selecting a position for your unit make sure the floor is flat and firm, and that the room is well
ventilated with an average room temperature of between 16°C and 32°C. Avoid locating your unit near
a heat source, e.g. a cooker, boiler or radiator. Avoid direct sunlight. If you are placing your unit in an
GB
outbuilding such as a garage or annex ensure that the unit is placed above the damp course, otherwise
condensation will occur on the cabinet. Never place the unit in a wall recess or into fitted cabinets or
furniture.
When installing the unit, ensure that 2 cm of free space is left at both sides and 3 cm at the rear of the
unit. The door can open to the right or the left, depending on what better suits the location. Please
ensure there is adequate space for the door to fully open.
• If you want to have the door swing reversed, we recommend that you contact a qualified
technician. You should only try to reverse the door yourself if you believe that you are qualified
to do so.

Ensuring Optimum Performance of Your Appliance

Please note that to ensure optimum performance of your appliance, sufficient ventilation must be
provided to allow heat from the appliance to escape.
If the appliance is placed under a continuous worktop, the appliance lid (if applicable) may be removed
and a ventilation grille of at least 200 cm
to the worktop above the rear of the appliance to increase ventilation.

Benefits of Increased Ventilation

• Lowered power consumption
• Reduce running costs
22
x cm
x cm
x cm
x cm
(available from DIY shops or specialist retailers) should be installed
2
min. 200 cm
x cm = sufficient ventilation
space required for
optimum performance.
2
• Improved cooling performance
• Prolong product life span