View And Record Video - Axis P3719-PLE User Manual

AXIS P3719-PLE Network Camera
Configure your device

View and record video

This section includes instructions about configuring your device. To learn more about how streaming and storage works, go to
Streaming and storage on page 36.
Reduce bandwidth and storage
Important
Reducing the bandwidth can result in loss of details in the image.
1. Go to Video > Stream.
2. Click
3. Select Video format H.264.
4. Go to Video > Stream > General and increase Compression.
5. Go to Video > Stream > H.264 and H.265 encoding and do one or more of the following:
- Select the Zipstream level that you want to use.
- Turn on Dynamic FPS.
- Turn on Dynamic GOP and set a high Upper limit GOP length value.
Set up network storage
To store recordings on the network, you need to set up your network storage.
1. Go to System > Storage.
2. Click +Add network storage under Network storage.
3. Type the IP address of the host server.
4. Type the name of the shared location on the host server under Network Share.
5. Type the username and password.
6. Select the SMB version or leave it on Auto.
7. Check Add share even if connection fails if you are experiencing temporary connection issues, or the share is not
yet configured.
8. Click Add.
Record and watch video
Record video directly from the camera
1. Go to Video > Image.
2. To start a recording, click
If you haven't set up any storage, click Set up. You can use an SD card or network storage.
- See Set up network storage on page 9 .
3. To stop recording, click
in the live view.
.
again.
9