Advertisement
14
Specifications
HG-C1030
NPN output
HG-C1030-P
PNP output
Measurement center
30mm
distance
Measurement range
±5mm
Repeatability
10µm
Linearity
Temperature
characteristic
Beam diameter
≈ 50µ
2
Light source
Supply voltage
Power consumption
NPN output type:
NPN open collector transistor
● Maximum sink current: 50mA
Control Output
● Applied voltage: max. 30V DC
(between control output to 0V)
● Residual voltage: max. 1.5V (at 50mA sink current)
● Leakage current: max. 0.1mA
Output operation
Short-circuit
protection
Analog voltage
output
Analog current
output
Response time
Switchable between high speed (1.5ms), standard (5ms), and high precision (10ms)
NPN output type:
NPN non-contact input
Input conditions:
External input
Invalid: +8 to +V DC or open
Valid: 0 to +1.2V DC
Input impedance: ≈ 10kΩ
Degree of protection
Degree of pollution
Ambient temperature
Ambient humidity
Ambient illumination
Operating altitude
Cable
Material
Weight
Applicable standards
Measurement conditions: 24V supply voltage, 20°C ambient temperature,
1
10ms response time. The subject is white ceramics.
This is the size in the measurement center distance. These values were
2
defined by using 1/e
(approx. 13.5%) of the center light intensity. Due to leak
2
light outside the specified area, the reflectance around the detecting point may
be higher than at the point and this may affect the measurement value.
All manuals and user guides at all-guides.com
HG-C1050
HG-C1100
HG-C1050-P
HG-C1100-P
50mm
±15mm
30µm
±0,1% F.S.
≈ 70µ
m
m
Red semiconductor laser class 2 (JIS / IEC / GB) / class II
Max. output: 1mW, emission peak wavelength: 655nm
12 to 24V DC ±10% including ripple max. 10% (P-P)
max. 40mA (at 24V DC supply voltage), max. 60mA (at 12V DC supply voltage)
Selectable either Light-ON or Dark-ON
Voltage output: 0 to 5V (Alarm: +5.2V)
Current output: 4 to +5V (Alarm: 0mA)
-10 to +45°C (no dew condensation or icing allowed), storage: -20 to +60°C
35 to 85% RH, at storage: 35 to 85% RH
3000ℓx max. (Illumination level of light receiving surface under incandescent light)
0.2mm
Enclosure: die-cast aluminum, front cover: acrylic
≈ 35g (without cable), ≈ 85g (including cable)
HG-C1200
HG-C1200-P
100mm
200mm
±35mm
±80mm
70µm
70µm
±0,2% F.S.
0.03%F.S./°C
≈ 120µ
≈ 300µm
m
PNP output type:
PNP open-collector transistor
● Maximum source current: 50mA
● Applied voltage: max. 30V DC
(between control output to 0V)
● Residual voltage: max. 1.5V (at 50mA source current)
● Leakage current: max. 0.1mA
Incorporated (auto-reset)
Output impedance: 100Ω
Load impedance: max. 250Ω
PNP output type:
PNP non-contact input
Input conditions:
Invalid: 0 to +0.6V DC or open
Valid: +4 to +V DC
Input impedance: ≈ 10kΩ
IP67 (IEC)
2
Max. 2000m
5-core composite cable, 2m long 2m
2
EMC Directive
Panasonic Industrial Devices SUNX Co., Ltd.
http://panasonic.net/id/pidsx/global
Overseas Sales Dept. (Head Office)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Telefon: +81-(0)-568-33-7861 FAX: +81-568-33-8591
Europe Headquarter: Panasonic Electric Works Europe AG
Robert-Koch-Straße 100, D-85521 Otttobrunn, Germany
Telefon: +49-89-45354-1000
7
7
HG-C1400
HG-C1400-P
400mm
±200mm
● 300µm (measurement distance 200
to 400mm)
● 800µm (measurement distance 400
to 600mm)
● ±0,2% F.S. (measurement distance
200 to 400mm)
● ±0,3% F.S. (measurement distance
400 to 600mm)
≈ 500µm
Advertisement
