Specifications - Panasonic CQ-RX200U Service Manual

2 Specifications

2.1. Specifications*
General
Power Supply DC 12V (11V - 16V)
Test Voltage 14.4V
Negative Ground
Current Consumption Less than 2.1A
(CD mode, 0.5W 4-Channels)
Maximum Power Output 50W × 4 (at 1kHz), volume control maxi-
mum
Tone/SQ Adjustable SQ Low/Bass:±12dB
Range (at 60 Hz, 80 Hz, 100 Hz, 200Hz)
SQ Mid: ±12 dB
(at 500 Hz, 1 kHz, 2 kHz, 3kHz)
SQ High/Treble: ±12 dB
(at 10kHz, 12kHz, 15 kHz, 18 kHz)
4 - 8 Ω
Speaker Impedance
Pre-amp Output Voltage 2.0 V (CD mode: 1 kHz, 0 dB)
200 Ω
Pre-amp Output Imped-
ance
Front AUX Input
Input Impedance 10 kΩ
Allowable External 2.0 V
Input
Connector 3.5 mm Stereo mini-pin
Dimensions (W×H×D)** 178×50×160mm (7"×1-5/16"×6-5/16")
Weight** 1.2 kg (2 lbs. 10 oz)
Disc Player
Sampling Frequency 8 times oversampling
DA Converter 1 bit DAC System
Pick-Up Type Astigma 3-beam
Light Source Semiconductor Laser
Wave Length 790 nm
Frequency Response 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio 96 dB
Total Harmonic Distor- 0.01 % (1 kHz)
tion
Wow and Flutter Below Measurable Limits
Channel Separation 85 dB
FM Radio
Frequency Range 87.9 MHz - 107.9 MHz
10.2 dBf (0.9 µV, 75 Ω)
Usable Sensitivity
15.2 dBf (1.6 µV, 75Ω)
50 dB Quieting Sensitiv-
ity
Frequency Response 30 Hz - 15 kHz (±3 dB)
Alternate Channel Selec- 75 dB
tivity
Stereo Separation 35 dB (at 1 kHz)
Image Rejection Ratio 55 dB
IF Rejection Ratio 100 dB
Signal to Noise Ratio 62 dB
AM Radio
Frequency Range 530 kHz - 1710 kHz
Usable Sensitivity 27 dB/µV (22µV, S/N 20 dB)
* Specifications and the design are subject to possible modification
without notice due to improvements.
** Dimensions and Weight shown are approximate.
** Above specifications comply with EIA standards.
All manuals and user guides at all-guides.com
3
2.2. Dimensions