Table of Contents
Advertisement
3 EN-US English
3.6 Quick start guide
3.6.1 Starting the camera for the first time
1.
Charge the battery for 3 hours using the stand-alone battery charger.
2.
Put the battery into the camera battery compartment.
3.
Insert a memory card into the card slot.
Note Empty or use a memory card that has not previously been used in an-
other type of camera. The cameras may organize files differently on the
memory card. There is therefore a risk of losing data if the same memory
card is used in different types of cameras.
4.
Push the on/off button
3.6.2 Detecting a gas leak
1.
Aim the camera toward the object of interest.
2.
Adjust the camera focus.
3.
If there is a gas leak, and the gas is one of the gases that the camera can de-
tect, you will now see the leak on the screen. The leak will resemble a smoke
plume emanating from the point of the leak.
Note To obtain optimal contrast, try to find a suitable background by aiming
the camera toward the object from different angles.
4.
To save an image, push the Save button.
5.
To record a video clip, do the following:
5.1.
Select
5.2.
To start recording a video clip, push the Save button.
5.3.
To stop recording a video clip, push the Save button again. The re-
cording is automatically saved.
#T810428; r. AB/55676/55676; mul
to turn on/off the camera.
(Recording mode) >
(Video).
4
Advertisement
Table of Contents
