Installing The Receiver - Pacific 0534 User Manual

Connecting the camera
Connect the DC plug of the power unit to the voltage supply jack of the camera. Pay
attention to the correct input voltage of 7.5V DC!
- Insert the plug-in power unit into a suitable mains socket.
- The camera is now ready for use.

Installing the Receiver

Set up the receiver approx. 1 m above ground (better receiving conditions). There
must be a power outlet proximity to the receiving site.
A TTENTION! Only place the receiver on rugged and stable surfaces.
1. Receiver antenna
2. Power plug
3. A/V Output
4. LED (RED for Channel1,2,3,4, BLUE for USB connection)
5. Channel selection switch
6. USB connector
7. Power supply
8. A/V cable
Connecting the receiver to monitor
● Connect the A/V cable as depicted to a suitable monitor or TV system with an A/V
cinch input and the receiver (white plug = audio (tone in mono), yellow plug = video).
● Connect the power supply