Motion Detection - Pacific 0534 User Manual

Motion Detection:

CamGuard Security System allows the monitoring area and sensitivity to be set
according to locale conditions. Motion Detection Area Setting: Motion detection area
can be set and only in case of abnormity detected in this area will the alarm be
triggered. Edit: To edit the monitoring area. Detection Sensitivity: This is the value of
motion detect sensitivity for triggering the alarm. Sensitivity Indication: The green
area indicates the current value detected, while the red line indicates the detection
value set by you. When the green area exceeds the red line, it indicates that the alarm
is triggered. The program will give out beep sound as prompt.
Click the "Edit" button to edit the monitoring area. The program provides three
editing modes: to make rectangular selection with the mouse, inverse the selected area,
and fill up a color block. When using rectangular selection or color block, you can
click the right button of the mouse to delete the selected area. Clear: Clear the
monitoring area.