Page 1
User's Manual Model No.: 0534 2.4 GHz Wireless Weatherproof Monitoring System with Dual Mode (USB & A/V) Receiver Wireless Color Weatherproof Camera(CCD-602S) Wireless Stylish Dual Mode (USB & A/V)(CCD-680DR) PLEASE READ CAREFULLY AND SAVE This manual contains important information about this product's operation.
Page 2
Important! Please read this user manual carefully before installing or using these units. WARNING- These units should ONLY be disassembled by an authorized technician if service is required. Safety Precautions For correct and safe operation of this system, it is essential that installers, end-users and service technicians should follow all safety procedures outlined in this manual.
Model No.: 0534 Contents Safety and Hazard Notices ---1 FCC/CE WARNING-----------3 Parts Included in This System-----3 Installing the Camera--------4 Installing the Receiver--------5 System Requirements--------5 System Installation--------6 Software installation--------7 Device Setting / Video Device--------10 About Alarm / Alarm Actions--------11 Record location / Email--------12...
Page 4
The following symbols need to be observed: = An exclamation mark in a triangle indicates important notices in these operating instructions that must be observed under all circumstances. = A lightning symbol warns of electric shock or the impairment of the appliance's electric safety.
FCC/CE NOTICE This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacture's instructions, may cause interference to radio and television reception. It has been tested and found to comply with limits for a Class B digital device in accordance with Part 15 of FCC Rules and CE I-ETS 300 440, which are designed to provide reasonable protection against such interference in a residential installation.
Installing the Camera ATTENTION! Prior to drilling and inserting the screws, make sure that there are no electric cables pipes, etc. in the wall that may become damaged. 1. Rain protection cover 2. In the dark, the integrated infrared lighting is switched on automatically 3.
Connecting the camera Connect the DC plug of the power unit to the voltage supply jack of the camera. Pay attention to the correct input voltage of 7.5V DC! Insert the plug-in power unit into a suitable mains socket. The camera is now ready for use. Installing the Receiver Set up the receiver approx.
● Select the correct channel which same as camera. ● The receiver is now ready for use. ● While having the USB jack plug into USB port (USB 2.0 recommended) the blue LED (USB connection LED) will light up. The RED LED is the channel LED. Conneting the receiver to PC 1.
a) Manual channel selection: To set the channel selection switch on the receiver, please take a pointed object, e.g. a ballpoint pen and select the desired channel switch (no. 1 to no. 4) to position "ON”. The selected channel always remains active. Receiver Set to Receiver Set to Receiver Set to Receiver Set to Channel 1 Channel 2 Channel 3 Channel 4 b) Auto-scan mode: If there is more than one camera in operation, you can allow the channels to run...
Page 10
Click [Next] to proceed the installation for CamGard Security System (Home Edition). Click [Yes] to proceed the installation, when the agreement is accepted. Select the destination location you wish to install the program (ex: C:/, D:/), and click [Next] to install the program. 9.
1. Click [Next] to install the USB Audio Device Driver, and click [Finish] when installation is finished. Device Setting: Select “Device Setting” under “Option”. Device: The video device can be used the listed here in your computer, please choose one for source of video. Attribute: Display dialog box of the selected video device.
Attribute: Display dialog box of the selected audio device. About Alarm: Alarm Duration (s): The duration between the time when something abnormal is detected to the time when the alarm is closed. Alarm Actions: 1. Sound: When any abnormity is detected, the program will play a stream of sound to scare the invader away.
Record location: 2. When any abnormity is detected, the program will automatically save the images or video data on the locale. You can set to save images or video. In "Locale File Format", you can select to save as "Image(JPEG)" or "Video". If you select to save as image, a Jpeg image will be saved every 0.5 second from the moment when abnormity is detected until the end of the alarm.
Telephone: 4. When abnormity is detected, the program will dial the telephone number preset through the modem installed on your PC. To enable the function, you need to install Modem on your PC with telephone line connected. "Dialup Device", the list shows all dial-up devices on your computer..
Motion Detection: CamGuard Security System allows the monitoring area and sensitivity to be set according to locale conditions. Motion Detection Area Setting: Motion detection area can be set and only in case of abnormity detected in this area will the alarm be triggered.
Record Schedule: To record video on the locale in the specified time period. If you want to use this function, you should first check the option "Enable Record in the list period" to select it New: To add a new time period; Modify: To modify the time period currently selected;...
according to your requirement. If other Web server, such as MS IIS, is installed on your computer, then please assign other values. Otherwise conflict will occur. "Access Permission": To set the account password for remote access. Both account and password are required when accessing. It is strongly recommended that you set this item to protect your privacy and the security of your computer.
Page 18
System Options - Auto Run "Launch the program automatically when the system starts": Select this option to enable auto-run of the program when the system starts and resume the status before the previous shutdown. "Dialup automatically when the program starts": Select this option to enable auto dialup to access the Internet according to the parameters set after the program starts.
Page 19
System Options - Network Internet Connection Mode: It can be set to either "Auto Detection" or "Direct Network Connection". In general, "Auto Detection" will do. In case that the program cannot detect out the network type, please set it to "Direct Network Connection". Connection Speed: To set network speed.
Technical Data Model No.: CCD-680E Camera Receiver 7.5V DC(plugin power 7.5V DC (plugin power Operating voltage unit) unit) Current consumption 300 mA 300 mA Transmitting frequency 2.4-2.4835Ghz 2.4-2.4835Ghz Modulation Channels Light sensitivity 3 Lux Video output level 1 Vp-p / 75 Ohm Audio output level, mono 1 Vp-p / 600Ohm Audio/Video Connection...
Dimensions without 100 x 76 x 26 (mm) L x 128x72x60 (mm) L x W x H Aerial W x H Maintenance The devices are maintenance-free, so never disassemble them. The guarantee becomes void to the expiration of the warranty! We will not assume any liability for when you disassembled the appliance.
Page 22
Observe the safety notices under all circumstances! Error Possible Cause No image and Camera or receiver is not supplied with electricity. no sound Is the power pack plugged in correctly? The distance between the camera and receiver is too long The range of the system was exceeded.
Page 23
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.