Table of Contents
Advertisement
Observe the safety notices under all circumstances!
Error
Possible Cause
No image and
no sound
The
image/sound is
distorted
Flickering/
running image
Normal sound,
image is too
light or dark
White image
only on the
monitor
Other repairs as described above may only be performed by an authorized
workshop.
Camera or receiver is not supplied with electricity.
Is the power pack plugged in correctly?
The distance between the camera and receiver is too long
The range of the system was exceeded. Shorten the distance
There is a strong interference source (e.g. electric engine,
walkie-talkie...etc.) nearby.
Strong spotlight in the cover range of the camera.
Surveillance monitor (TV) is adjusted wrongly (readjust
brightness).
Strong spotlight in the cover range of the camera.
The supply voltage is too low (change batteries or power
pack operation)
Advertisement
Table of Contents
