Warranty - Sigma Controls 100 Series Instruction Manual

All Sigma Controls, Inc. products are warranted to be free from
defective materials and workmanship for one (1) year from date of
shipment. Sigma reserves the right to repair or replace at its option
any product found to be defective.
Controls, Inc. be liable for any consequential, incidental, or special
damages and the limit of its liability shall not exceed the purchase
price of the supplied equipment.
SENSORS AND CABLE THAT HAVE BEEN USED IN WASTE WATER
OR HAZARDOUS LIQUIDS MUST BE THOROUGHLY CLEANED
BEFORE RETURNING. UNITS RETURNED UNCLEANED WILL BE
CONSIDERED UNREPAIRABLE AND RETURNED TO SENDER OR
DISCARDED. NOTE: DO NOT SUBMERGE UNITS FOR CLEANING
WITH CABLE CUT OR REMOVED. THIS WILL ALLOW CLEANING
FLUID TO ENTER HOUSING, DAMAGING ELECTRONICS AND
VOIDING THE WARRANTY.
RETURN FOR REPAIR POLICY (WARRANTY/NON-WARRANTY REPAIR)
Return status can be determined upon factory inspection of returned
equipment.
A completed Return Authorization form must accompany all items
returned for repair.
Repairs will be evaluated as quickly as possible. Cost for non-
217 S. Fifth Street, Perkasie, PA 18944 PH: 215-257-3412

WARRANTY

*****IMPORTANT*****
In no event shall Sigma
FAX: 215-257-3416
7