Maintenance; After Sales Service - Supra PERSEE Instructions For Installation And Use Manual

4. MAINTENANCE

4.1 ASH REMOVAL
Keep the access free for the cleaning of the stove and the flue. The ash is
removed using the pull (A) (fig. 4.1) and a small brush (not supplied). Wait
until the appliance has cooled.
– Clean the removable hearth grate.
– Empty the ash box regularly. An accumulation of ash limits the entering
under the grate, risks deforming the latter and interferes with the
combustion.
– Re-place ash box and grate before reloading.
4.2 MAINTENANCE OF THE FRONT OF THE STOVE
To freshen the appearance of the stove, use only a soft cloth and hot soapy
water (do not use any abrasive product, even slightly abrasive). Wipe
immediately.
4.3 CLEANING THE WINDOW
The window should be cleaned when cold, using a damp cloth dipped in
wood ash. The "clean glass" system that circulates air along the window
keeps it as clean as possible. Nevertheless, a slight blackening may occur
in certain areas of the window during normal operation. When operating at
reduced speed, the "clean glass" system does not work.
4.4 OBLIGATORY CHIMNEY SWEEPING
The law requires that the chimney be swept twice a year (including once
during the period of use) using mechanical means (flue brush). Have the
chimney sweeping book filled out by the company that does the job and
keep the bill.
After the flue has been swept, re-place the smoke baffle . Before using the
stove again, check that all the parts are correctly in place.
4.5 ANNUAL SERVICE
After each heating season, clean the stove completely and check that all
the moving parts of the appliance are working properly.
Remark: a cracked brick will not hinder the correct operation of the appliance.
PERSEE

5. AFTER SALES SERVICE

The appliance includes a certain number of wear parts, whose condition
should be checked during its annual service. Your dealer is able to supply
you with replacement parts.
For any information or spare parts, please give the item number and serial
number of the appliance which can be found on the manufacturer's plate.
Use only spare parts supplied by the manufacturer.
PERSEE
GB 7/8
40730-06-16